Tube Straightening And Cutting Machine, Flat Tube Straightening
Machine
1. Main Application
The tube straightening and cutting machine is used for
straightening and cutting aluminum harmonica
tubes of parallel flow condensers. The equipment is driven by a
servo motor. The raw material is conveyed
by a precision linear guidance rail. Cutting of the pipes is
conducted through a revolving knife or a linear knife.
The tube straightening and cutting machine is also equipped with a
fully-automatic decoiler.
Coil inner diameter: 450-500mm; width: 300-330mm; decoiler bearing
weight: 300kg;
Coil feeding method: manually place the coil on the decoiler, and
screw up the coil expansion core;
Decoiler motor power: 0.75kw
The decoiling method is stable and reliable. The tube straightening
and cutting machine has a high cutting
accuracy and a fast working speed.
The tube straightening and cutting machine is able to cut different
pipes by adjusting the distance of the straightening
rolling wheels. It takes twice or multiple charges to cut the
aluminum tube when the cut-to-length is very large.
2. Technical Parameters
Production rate: 2.5 seconds per time (based on cut-to-length at
650mm) Pipes to be straigthened and cutted per time: 2 pipes; Flat aluminum tube thickness: 1-3mm; Flat aluminum tube width: 14-32mm Cut-to-length: larger than 100mm Feeding length of the aluminum pipe: 200-900mm (twice or multiple
charges to cut the aluminum tube when the cut-to-length is very
large) Length straightening accuracy <±0.2mm Width straightening accuracy:±0.04mm/850nn Thickness straightening accuracy:±0.02/850mm Replacement time of coils: 3min Preparation time for cutting tubes with a different width :≤15min Cutting knife replacement time:≤5mins Air source pressure: 0.6Mpa Equipment weight: 2.8T Main Machine dimension: 4500×850×1300mm (the area length is 15m if
the decoiler is included.) Decoiler overall dimension: 1400×1300×1800mm ( 2 sets) |
Company Info
Wuxi Wondery Trading Co., Ltd is a comprehensive equipment supplier
cooperating with various domestic factories.
We can supply the heat exchanger production line for auto
radiators, condensers, oil-coolers, heaters, or other products,
and HVAC condensers and evaporators.
Auto Condenser Making machines Including: collecting pipe
single-punch mold; collecting pipe automatic forming machine;
aluminum one-end or two-end chamfering machine; semi-automatic core
builder; condenser side plate forming machine;
collecting pipe slitting machine; flat tube straightening and
cutting machine; aluminum brazing furnace.
Auto Radiator Making Machines
Brazing radiator machines: fin machine, radiator core
builder machine, plastic tank clinching machine, radiator leak
testing machine/leak detector, header and side plate mold,
continuous brazing furnace; mechanical radiator machines: high
speed fin punching machine, fin die,
tube-to-fin expansion machine, tube-to-header expansion machine,
plastic tank clinching machine, etc;
copper radiator machine line:fully-automatic tube making machine,
copper fin making machine,
gas-fired core body brazing furnace, header tinning furnace, manual
core builder machine.
